Why does my embroidery thread keep shredding?

The most common reason why thread shreds, frays, or breaks at the needle is because the eye is too small to accommodate the thread, causing stress and friction, which results in shredding or breaking the top thread.

How do I stop my embroidery thread from fraying?

For thread that clumps up frequently:

  1. Make sure to thread your embroidery machine through the tension bars properly.
  2. The bobbin is not inserted, or not inserted properly.
  3. Check for loose tension.
  4. Make sure both top and bottom tensions are about the same. …
  5. Make sure the thread is free of both the bobbin and hook area.

Why does my embroidery machine keep breaking thread?

The upper thread tension could be set too tight. Set the tension to the best thread tension setting or less. Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool. … Check that the bobbin is wound so that it about 80% full and that the thread is evenly wound.

IT IS INTERESTING:  Frequent question: Who drew Lilo and Stitch?

Why does my thread keep breaking on my Janome embroidery machine?

When your sewing machine thread keeps breaking, check for fluff and lint deposits that may interfere with the machine’s smooth operation. (How to clean a sewing machine) Double-check the bobbin and its casing as often a bit of thread may be caught there and if it has snapped off will affect your tension.

Why is thread bunching underneath my fabric?

Your Thread Tension Is Too Tight



Make sure that you are using the same weight thread in both your bobbin and upper thread. If you don’t, your tension can be uneven and cause you to get bunched-up thread under your fabric. … If your tension is too tight, it can pull your thread and break it.

What are the common embroidery thread problems?

Common Embroidery Sewing Problems; Possible Causes and Solutions

Problem Possible Cause
Difficulty threading needle 1. Eye too small for thread
Difficulty using metallic threads 1. Needle eye too small 2. Tension too tight
Thread pigtailing 1. Top tension too tight

What causes a thread to break?

Threads can break if your needle is not inserted properly. Make sure the eye of the needle is facing the front (not slanted) and that the scarf (indent) of the needle is facing the back. Burrs in the needle may also cause the thread to shred. It’s also important to check up on your needles from time to time.

What tension should my sewing machine be on?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

IT IS INTERESTING:  How much does stitching a blouse cost?

Why does my top thread keep getting stuck in the bobbin?

This can be caused if the top thread tension is too tight, or if the bobbin thread is not in the bobbin case tension. … Make sure the bobbin is correctly seated in the bobbin case (bobbin holder), and check that the upper thread tension is not set too tightly.

How do you loosen upper thread tension?

If the tension isn’t perfect, fix it by adjusting the bobbin spring; tighter if the bobbin thread shows on the upper layer, and looser if the needle thread shows on the underlayer. Make another test seam, and examine the stitches, repeating until the stitch is balanced.

Why does my bottom thread keep breaking?

A dirty shuttle race, improper thread routing or incorrect thread tension can break the bobbin thread. Unplug the sewing machine and check thread routing according to guidelines in your owner’s manual. Reroute the thread correctly if necessary.

Why does my thread keep breaking when I am free motion quilting?

The most common reason why thread shreds, frays, or breaks at the needle is because the eye is too small to accommodate the thread, causing stress and friction, which results in shredding or breaking the top thread.

My handmade joys