What setting should my sewing machine be on?

Most sewing is done in the 2.0 to 2.5 range. If you are foundation paper piecing, you may want to decrease your stitch length so that the paper tears away easier. Top stitching and quilting are usually done in the 3.0 to 3.5 range. Basting and gathering stitches are the longest, from 4.0 – 5.0.

What tension should my sewing machine be on?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

What setting should my sewing machine be on cotton?

Use size 70/10 for really thin cotton like voile, size 80/12 for light to medium weight cotton, and 90/14 for thick cotton like denim. Schmetz is a well-known brand for making good quality needles, so that’s what I mostly use.

What is the best stitch length for sewing a straight stitch?

Set the machine for straight stitch, with a stitch length of 3 to 3.5mm. Use a SINGER Topstitching Needle, size 90/14 for medium weight fabrics, or a SINGER Topstitching needle, size 100/16 for heavier fabrics. Sew 1/4″ – 3/8″ from the edge of the fabric.

IT IS INTERESTING:  Why do I get pins and needles in knitting?

Why is my thread bunching underneath?

Your Thread Tension Is Too Tight



Make sure that you are using the same weight thread in both your bobbin and upper thread. If you don’t, your tension can be uneven and cause you to get bunched-up thread under your fabric. … If your tension is too tight, it can pull your thread and break it.

What tension should I use for stretchy fabric?

For a stretchy fabric, it would be best if you set the upper tension level between 3-4. This adjustment is also a neutral level of tension setting. Step 5: Now, after you have attached the correct needle, stitch type, and tension setting, it is time to test the final stitch on your fabric.

What is a good stitch length?

For straight stitching, it is advised to set your machine’s stitch length to 2.5 to 3.0 or about 8-12 stitches per inch. This range works quite well for a majority of machine quilting but there are always exceptions when you make a rule. For threads with sparkle or shine, use a longer stitch length.

What tension should I use for thick fabric?

The thicker the fabric, higher the tension must be to lift the lower thread up to the middle of the layers of fabric. You will usually be alright with a 4 or 5 on medium to medium-heavy fabrics like linen and twill weaves such as drill and denim.

Why does my sewing machine keep jamming?

1 5 Reasons Why Your Sewing Machine Keeps Jamming: 1.1 Lack of tension on the upper thread. 1.2 Your machine is clogged at some point or place. 1.3 The needle is deformed or broken.

IT IS INTERESTING:  Best answer: Where does quilted maple come from?

Why is my bottom stitch not straight?

If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.

What are the settings for straight stitch on the sewing machine?

Basic Settings for Sewing Straight Stitches on a Sewing Machine

  • Stitch Length: 2.5mm or 10 (stitches per inch)
  • Stitch Width: needle centered over stitch plate*
  • Stitch Tension: 4.

How a straight stitch should look?

Straight Stitch



When it’s just right, your stitch will look like the one in the middle. The one on the left is too tight, causing the fabric to pucker, while the one on the right is too loose, making the stitches loopy.

My handmade joys