What does center front mean in sewing?

Center front (CF) – A vertical line marking the center of a pattern or a garment at the front. Clip – A small cut made with scissors into the seam allowances e.g. at a curved edge of a seam with the purpose of preventing the seam allowances from pulling or puckering.

What does center on fold mean?

Meaning it is cut that way to get a specific drape from the fabric or to line up a print. Center Front is edge of the pattern piece that they want you to place in line with the folded edge of the fabric. So when you cut it out, you get one continuous piece instead of two pieces with a seam to join them.

What does CB mean in sewing?

CB / Centre Back is the centre line on the back of the body. This line starts at the neck or head and runs diagonally down the middle of the back of the body and finishes on the ground.

What does right side facing mean in sewing?

When you sew two bits of fabric together it’s common to hear the phrase, ‘right sides together’ or ‘right sides facing‘. This means that the ‘right sides‘ of the fabric will be touching as you sew the seam. Then once its sewn and you turn the fabric over, you don’t see the seam and it looks nice and flat.

IT IS INTERESTING:  How do you make an old fleece blanket soft again?

What are the types of seams?

In clothing construction, seams are classified by their type (plain, lapped, bound, flat) and position in the finished garment (centre back seam, inseam, side seam). Seams are finished with a variety of techniques to prevent ravelling of raw fabric edges and to neaten the inside of garments.

What factors affect the choice of seam?

Many factors affect the level of seam strength. These are fabric structure and properties, stress location of a garment, sewing thread type and construction, sewing machine tension, sewing needle type, stitch and seam types and stitch density [12].

Why do pattern pieces have a fold line?

On the Fold – Represented by a line with arrows pointing in a particular direction, the “on the fold” marking shows you where to position the edge of your pattern piece on a fold of your fabric. This allows you to cut a piece of fabric that is twice as large as the pattern piece.

What are the dots on a sewing pattern for?

Dots are made in various sizes by the pattern companies. These must be marked onto your fabric. They indicate starting and stopping points for stitching, as well as points to match up markings for things like darts.

What does cut one on fold mean in sewing?

– “Place on fold” or “Cut 1 on fold” → Line up the fold edge indicated on the pattern with the fold of the fabric. You’ll end up cutting one symmetrical piece of fabric from a pattern piece which corresponds to half. … So in this example, you’d cut two pieces in fabric and two matching pieces in interfacing.

IT IS INTERESTING:  Do acrylic beads melt?

What are the tailoring terms?

Glossary of Tailoring Terms You Need To Understand | Senszio

  • Bottom. This is your preferred hem circumference around your trouser legs.
  • Break. The break refers to how much of the trousers touch your shoes. …
  • Bring Up. Bringing up refers to shortening the length here or there.
  • Cuffs. …
  • Darts. …
  • Garment-Washed. …
  • Hem. …
  • Hindarm seam.

What are the pattern symbols?

It’s important to note, however, that each pattern company may feature slightly different symbols – but they should follow similarly to the ones below.

  • Grain Line. …
  • Fold Line. …
  • Centre Front or Back. …
  • Cutting Line. …
  • Stitching Line. …
  • Seam Allowance Marking. …
  • Adjustment Line. …
  • Notches.

What is a seam allowance in sewing?

A seam allowance is the area between the fabric edges and the line of stitches. Seam allowances can range from 1/4″ wide to as much as several inches. Most patterns call for a specific seam allowance. … If your seams aren’t accurate, you may run out of fabric or the pieces may not line up correctly.

Do you sew on the right or wrong side?

You usually sew things with right sides together so the stitching will be on the inside of the finished project. Wrong side: The other surface is the “wrong” side of the fabric. The fabric design is sometimes visible on the wrong side of the fabric, but it will be more faded than on the right side.

How important are the markings during the sewing process?

The markings can tell you how to place your fabric, where to stitch, where to cut, and more. And often you’ll want to transfer these markings to your fabric for accurate results when you sew. Transferring pattern markings is a fairly quick and easy process, depending on how large your project is.

IT IS INTERESTING:  How much will an ER visit for stitches cost?
My handmade joys