Question: What is upper tension in sewing machine?

If one side is pulling too much, the thread from the other side will be visible. If the bobbin thread shows on the top side of the seam and the top thread is straight, the upper tension is too tight. If top thread shows on the underside of the seam and the lower thread is straight, the upper tension is too loose.

What should tension be set on sewing machine?

As the bobbin thread tension is factory-set and wouldn’t usually be adjusted for normal sewing. So we’ll be talking only about the top thread tension since that’s where you’d usually make the adjustments. The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing.

Why is my thread bunching underneath?

Your Thread Tension Is Too Tight



Make sure that you are using the same weight thread in both your bobbin and upper thread. If you don’t, your tension can be uneven and cause you to get bunched-up thread under your fabric. … If your tension is too tight, it can pull your thread and break it.

Why is the tension on my sewing machine wrong?

If the bobbin case falls a couple of inches, the tension is correct. If the bobbin case falls several inches, the bobbin tension is too loose. If the bobbin doesn’t fall at all, the bobbin tension is too tight. There is a small screw on the side of the bobbin.

IT IS INTERESTING:  What does TBL mean in knitting terms?

How do I adjust my knitting tension?

The easiest way to make your tension less loose is to change your knitting needles to a smaller size. One size (5mm) down does the trick in most cases. If it’s not enough, keep going down in size until it feels good to knit, and the fabric you create has a structure you like.

What tension should I use for cotton?

Cotton requires a moderate tension setting, usually between three and four. Always start adjusting your tension settings with your upper tension.

What should the tension be on a Brother sewing machine?

The tension dial should be set between 2 to 6. b. When the upper thread is just visible on the back of the fabric, the thred tension is correct.

My handmade joys