Do you put the bobbin thread through the needle?

The thread enters the tension spring of the bobbin case. Pass the bobbin thread through the slot. Do not cut the thread with the cutter. While lightly holding the upper thread with your left hand, press (Needle position button) twice to lower and then raise the needle.

Do you thread the bobbin thread through the needle?

Draw up the Bobbin Thread



After you get the top thread prepared and through the eye of the needle, you need to draw the bobbin thread up through the needle plate. The steps are similar whether your bobbin is front-loading or top-loading.

Why sew with the bobbin thread in the needle?

Sew darts in sheer fabric using only bobbin thread threaded in the needle also.It makes darts look nice and eliminates the need for backstitching and knots.

Where does the bottom bobbin thread go?

Once you have a wound bobbin, it goes in the machine’s bobbin case to supply the lower thread as your machine sews. To load your bobbin, lift your needle and presser foot to the highest position (your machine will either use a hand wheel or a button for this) and remove the bobbin cover.

IT IS INTERESTING:  What is the product of knitting?

Can you sew with bobbin thread?

A quality bobbin thread can be almost as strong as normal sewing thread. Regular weight sewing thread would be used in almost all sewing, but bobbin thread is a welcome addition to your sewing basket when the need arises.

How does the needle catch the bobbin thread?

The bobbin case has a little inverted tooth that catches the upper thread from the needle and pulls it in a circle to lock it and create the stitch.

Where should my bobbin thread be?

The bobbin thread is looped around the upper thread and can be pulled up. Carefully pull the upper thread upward to pull out the end of the bobbin thread. Pull up the bobbin thread, pass it under the presser foot and pull it about 10 cm (4 inches) toward the back of the machine, making it even with the upper thread.

How does the bobbin thread work?

Beneath the needle (as the GIF shows at a very slowed down speed) a hook rotates, capturing the thread from above and looping it around another thread, this one reeling from the bobbin below. The two threads interlock around the layers of fabric, binding them to one another.

Why isn’t my bobbin thread coming up?

– Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly. … The flat side of the needle should be facing toward the back of the machine.

IT IS INTERESTING:  Is counted cross stitch easy?

Can I sew without a bobbin?

You can’t sew without a bobbin, as the machine requires two spools in order to operate properly. Therefore, you will need to add the bobbin thread in addition to your needle thread.

Why is my thread bunching underneath?

Your Thread Tension Is Too Tight



Make sure that you are using the same weight thread in both your bobbin and upper thread. If you don’t, your tension can be uneven and cause you to get bunched-up thread under your fabric. … If your tension is too tight, it can pull your thread and break it.

What is the bottom bobbin for?

In general, the bobbin is the thing that feeds the thread to stitch from the lower part of the machine. Its purpose is to hold the thread below the needle, and it is where the thread in which you stitch comes from.

My handmade joys