You asked: What are the different knobs on a sewing machine?

What are all the dials on my sewing machine?

Step 2: Anatomy of a Sewing Machine

  • Stitch Selector – this dial lets you pick what kind of stitch you want to use. …
  • Stitch Length Selector – this dial lets you adjust the length of your stitches for different applications. …
  • Hand Wheel – the hand wheel lets you manually move the needle up and down.

What do the knobs on a Singer sewing machine do?

the knob in the middle of this one allows me to change my needle position from far right to far left. The needle will only move to the widest point of the zigzag (so I can move 2.5mm from the centre). I mainly move the needle across when using a zipper foot.

What does the number dial on a sewing machine mean?

The stitches are numbered on your machine, but in most manuals it has both the stitch number and the name of the stitch (satin, stretch, zigzag), as well as the tension, length, and width setting. Stitch Length: Increasing makes the stitch longer, which is great for basting stitches or when sewing very heavy fabric.

IT IS INTERESTING:  What size yarn is good for sweaters?

What are the settings on a sewing machine?

Basic Settings for Sewing Straight Stitches on a Sewing Machine

  • Stitch Length: 2.5mm or 10 (stitches per inch)
  • Stitch Width: needle centered over stitch plate*
  • Stitch Tension: 4.

What tension should my sewing machine be on?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

Why is the thread bunching up under my fabric?

Your Thread Tension Is Too Tight



Make sure that you are using the same weight thread in both your bobbin and upper thread. If you don’t, your tension can be uneven and cause you to get bunched-up thread under your fabric. … If your tension is too tight, it can pull your thread and break it.

What is the bottom bobbin for?

In general, the bobbin is the thing that feeds the thread to stitch from the lower part of the machine. Its purpose is to hold the thread below the needle, and it is where the thread in which you stitch comes from.

Which type of light is best for sewing?

Natural daylight offers one of the best sources of light in a room. Make sure to keep direct sunlight away from your sewing machine and supplies as the ultraviolet (UV) rays from the sun can damage fabric, threads, and even your machine over time.

IT IS INTERESTING:  What is twill weave explain with example?

Do you sew away or towards you?

It reverses the direction that the machine feeds, so that the fabric travels toward you as the machine sews. Often, this button or lever is spring-loaded, so you must hold it down to sew in reverse. At the end of a seam, sew a few stitches in reverse back over the last few stitches you just made.

How do you adjust bobbin tension?

To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.

How do I fix bobbin thread bunching up?

How to Fix Bobbin Thread Bunching and Other Threading Problems

  1. Thread the Machine Properly. Re-thread the upper part of the sewing machine making sure the thread is passing through every single thread guide on its way to the needle. …
  2. Change the Needle. …
  3. Inspect the Bobbin. …
  4. Clean the Machine.

What is a good stitch length?

The average stitch length is 2.5mm. This is the typical setting on newer sewing machines. Older machines usually give you a range of about 4 to 60 which tells you how many stitches per inch; the equivalent of 2.5mm is about 10-12 stitches per inch. The smaller the stitch length number, the smaller the stitch.

What does a good straight stitch look like?

Straight Stitch



When it’s just right, your stitch will look like the one in the middle. The one on the left is too tight, causing the fabric to pucker, while the one on the right is too loose, making the stitches loopy. Here’s the same stitch on the underside of the fabric.

IT IS INTERESTING:  Best answer: What is a blind stitch on a sewing machine?
My handmade joys