You asked: Are fuse beads the same as Perler beads?

There are many Perler Bead knock-off brands such as Hama Beads, Melty Beads, Beads, and Pyssla Beads. Collectively, all these beads are commonly called, “Iron Beads” or “Fuse Beads,” which are general terms for being melted together.

What are fuse beads?

Introduction to fuse beads



Perler beads (as known as Hama beads or Nabbi beads) are plastic fusible beads. These colorful beads are usually arranged on plastic pegboards to form patterns and then fused together with a clothes iron. … Crafting Perler beads is a fun and inexpensive art form that inspires creativity.

Whats the difference between Perler beads and Hama beads?

Hama beads have a lower melting point than perler beads, and you can see from this picture that they look quite a bit different when melted. The hama beads ended up being noticeably shorter and more rounded at the top (like nabbi beads) than perler beads. They also have a bit more gloss to them than Perlers.

IT IS INTERESTING:  How long should wood bead garland?

Are there different sizes of Perler beads?

They are available in three different sizes; mini, midi and maxi. Mini are 2.5mm, midi are 5mm,and maxi are 10mm. For more sizing info, Click Here. They tend to melt quicker than perler beads and also have a different feel to them as well.

What are Perler beads made of?

Perler Beads are plastic fusible beads. They’re made from a food-grade plastic called low-density polyethylene. They don’t contain harmful chemicals. The beads are arranged on pegboards to form patterns and then fused together with heat from a clothes iron.

How long do you iron fuse beads?

NOTE: Beads need heat for about 10-20 seconds per side to fuse evenly, and some colors may fuse more quickly than others.

Can you melt Perler beads with a hair dryer?

Apart from drying your hair, you can use your electric hair-dryer to melt your Perler beads. Just place parchment paper over your creation before heating it. You’ll then need to flip it over to the other side once the pellets have melted. … Otherwise, you may blow off your beads from the pegboard.

Can you mix Perler and Hama beads?

Hama and Perler, for example, could still be mixed. It will be more difficult to get a good looking result, though, as they are made of two different plastics that melt at different speeds.

Is Melting Perler Beads toxic?

Is Melting Perler beads toxic? Perler Beads fuse through the process of melting with a regular home iron, then cooling. — The plastic and color dyes used to manufacture the beads are all non- toxic.

IT IS INTERESTING:  Why do quilts cost so much?

How do you melt Perler Beads without an iron?

4 Ways to Melt Perler Beads (Without an Iron)

  1. 1 – Use a Hot Pan. Using a hot pan to melt perler beads is the most similar method to using an iron. …
  2. 2 – Use a Lighter. This method will work best if you have an extra-long lighter. …
  3. 3 – Use a Candle. …
  4. 4 – Use the Oven.

Can I use aluminum foil for Perler beads?

Tear off a large piece of aluminum foil, forming it into a freeform dish shape. If desired, place it inside an oven-safe bowl to help it hold its form. Spray a light coating of vegetable oil on the inside of the aluminum foil dish. Place the Perler beads in the foil dish, and arrange them in the desired configuration.

What setting should the iron be on for Perler beads?

Heat your beads.



Heat a dry iron to a medium setting, then slowly run it in a circular motion over the parchment paper. You’ll have to continue this for about 10 seconds for the beads to stick together.

How do you make Perler beads shiny?

Get some ironing film for shiny beads



Parchment paper or the standard ironing paper that comes with Perler Beads leaves a matte-like finish on your finished fuse bead project. Wax paper can leave a waxy residue. The perfect solution is ironing film.

How do you keep Perler beads from warping?

This can be easily done by rolling your masking tape roll over the project. If you are making a large project using the tape roll would take forever, so just use something larger like a marker on it’s side or a rolling pin. The key is just to make sure that each and every Perler Bead is stuck to the masking tape.

IT IS INTERESTING:  Best answer: What is knitting short answer?

What were Perler beads called in the 90s?

If you grew up in the 80s or 90s, there’s a good chance you’re familiar with Perler beads already. Growing up, we called them Perler beads, but they seem to go by many other different names now too, such as Hana beads, fuse beads, and melty beads.

My handmade joys