Why is my sewing machine so tight?

If the bobbin case falls several inches, the bobbin tension is too loose. If the bobbin doesn’t fall at all, the bobbin tension is too tight. There is a small screw on the side of the bobbin. Using the screwdriver in your machine tool kit, turn the screw a quarter-turn right to tighten, left to loosen.

Why is my sewing machine tight?

This indicates that the tension is too loose on both the bobbin and needle thread, the machine has not been threaded correctly, or the thread has not been placed properly between the tension mechanism.

What’s wrong with my sewing machine tension?

If the tension isn’t perfect, fix it by adjusting the bobbin spring; tighter if the bobbin thread shows on the upper layer, and looser if the needle thread shows on the underlayer. Make another test seam, and examine the stitches, repeating until the stitch is balanced.

What number should the tension be on a sewing machine?

As the bobbin thread tension is factory-set and wouldn’t usually be adjusted for normal sewing. So we’ll be talking only about the top thread tension since that’s where you’d usually make the adjustments. The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing.

IT IS INTERESTING:  You asked: What is a column in knitting?

Why is my thread bunching underneath?

Your Thread Tension Is Too Tight



Make sure that you are using the same weight thread in both your bobbin and upper thread. If you don’t, your tension can be uneven and cause you to get bunched-up thread under your fabric. … If your tension is too tight, it can pull your thread and break it.

What tension should I use for stretchy fabric?

For a stretchy fabric, it would be best if you set the upper tension level between 3-4. This adjustment is also a neutral level of tension setting. Step 5: Now, after you have attached the correct needle, stitch type, and tension setting, it is time to test the final stitch on your fabric.

How do you adjust thick fabric tension?

The thicker the fabric, higher the tension must be to lift the lower thread up to the middle of the layers of fabric. You will usually be alright with a 4 or 5 on medium to medium-heavy fabrics like linen and twill weaves such as drill and denim.

What should the tension be on a Brother sewing machine?

The tension dial should be set between 2 to 6. b. When the upper thread is just visible on the back of the fabric, the thred tension is correct.

How do you diagnose a sewing machine problem?

HERE are 10 most common trouble areas of a sewing machine:

  1. Change the Needle. …
  2. Clean the Machine. …
  3. Check the Top Threading. …
  4. Quality Thread. …
  5. Bobbin thread not in the bobbin tension. …
  6. Not having your machine cleaned annually. …
  7. Wrong bobbin. …
  8. Needle not high enough.
IT IS INTERESTING:  Who invented bobbin case?

What width should my sewing machine be on?

A straight stitch has no width so it makes sense to set the dial at “0”. However, each machine varies so you will want to set the Stitch Width dial at the position where the needle is centered over the stitch plate. This will give you the most accurate seam allowance.

My handmade joys