What tension should I use on my Brother sewing machine?

The tension dial should be set between 2 to 6. b. When the upper thread is just visible on the back of the fabric, the thred tension is correct.

What should sewing machine tension be set at?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

How do you set the tension on a Brother sewing machine?

Turn the thread tension dial to a lower number (toward the left). (Loosen the thread tension.) When the upper thread is visible from the lower side of the fabric. Turn the thread tension dial to a higher number (toward the right).

Why is my thread bunching underneath?

Your Thread Tension Is Too Tight



Make sure that you are using the same weight thread in both your bobbin and upper thread. If you don’t, your tension can be uneven and cause you to get bunched-up thread under your fabric. … If your tension is too tight, it can pull your thread and break it.

IT IS INTERESTING:  Who wins sewing bee?

How do you fix sewing tension?

Changing Bobbin Tension



Turning the screw a tiny bit counterclockwise will loosen the bobbin tension; turning it clockwise will tighten the tension. Some quilters keep two bobbin cases on hand, leaving one as-is from the factory and using the other when they need to make adjustments.

How do I know if my bobbin tension is correct?

The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.

What is wrong with the tension on my sewing machine?

Poor thread tension on a machine-sewn seam can result in an unstable seam, puckering, or just plain unattractive stitching. Perfect machine stitches interlock smoothly and look the same on both sides of the fabric. If you see small loops on the right or wrong side, the thread tension isn’t correct.

What tension should I use for stretchy fabric?

For a stretchy fabric, it would be best if you set the upper tension level between 3-4. This adjustment is also a neutral level of tension setting. Step 5: Now, after you have attached the correct needle, stitch type, and tension setting, it is time to test the final stitch on your fabric.

What tension should I use for cotton?

Cotton requires a moderate tension setting, usually between three and four. Always start adjusting your tension settings with your upper tension.

IT IS INTERESTING:  Your question: What is a 360 frontal sew in?
My handmade joys