Turn the thread tension dial to a lower number (toward the left). (Loosen the thread tension.) When the upper thread is visible from the lower side of the fabric. Turn the thread tension dial to a higher number (toward the right).
What should the tension be on a Brother sewing machine?
The tension dial should be set between 2 to 6. b. When the upper thread is just visible on the back of the fabric, the thred tension is correct.
Where is the thread tension control on a sewing machine?
Top thread tension is controlled by a dial on the machine’s thread path. So make sure the thread sits correctly between the tension discs when you’re threading your machine. If it doesn’t, then the machine won’t be able to sew properly.
How do you fix top thread tension?
If the tension isn’t perfect, fix it by adjusting the bobbin spring; tighter if the bobbin thread shows on the upper layer, and looser if the needle thread shows on the underlayer. Make another test seam, and examine the stitches, repeating until the stitch is balanced.
Why is my thread looping underneath?
Looped stitches are usually caused by improper tension. … Looping of stitches is sometimes caused by placing the bobbin in the bobbin case the wrong way. Check your machine’s manual for directions on inserting the bobbin. There may be lint, dirt, or thread between tension discs.
How do you adjust the bobbin tension on a Brother sewing machine?
The bobbin case installed in this machine can be adjusted, if necessary, to accommodate the bobbin tension for embroidering.
- Using a small slotted screwdriver, turn the slotted head (-) screw to adjust the bobbin case tension. …
- The thread tension is correct when upper thread slightly appears on the wrong side of fabric.
How do you know what tension to use on a sewing machine?
What is Perfect Sewing Machine Tension? Perfect sewing machine tension occurs when the top and bottom threads are perfectly balanced. That means you shouldn’t see any little loops on either the top or bottom of your fabric and the stitching should look even on both sides.
What settings should my sewing machine be on?
Most sewing is done in the 2.0 to 2.5 range. If you are foundation paper piecing, you may want to decrease your stitch length so that the paper tears away easier. Top stitching and quilting are usually done in the 3.0 to 3.5 range. Basting and gathering stitches are the longest, from 4.0 – 5.0.
Why is the tension on my sewing machine wrong?
If the bobbin case falls a couple of inches, the tension is correct. If the bobbin case falls several inches, the bobbin tension is too loose. If the bobbin doesn’t fall at all, the bobbin tension is too tight. There is a small screw on the side of the bobbin.
What tension should I use for stretchy fabric?
For a stretchy fabric, it would be best if you set the upper tension level between 3-4. This adjustment is also a neutral level of tension setting. Step 5: Now, after you have attached the correct needle, stitch type, and tension setting, it is time to test the final stitch on your fabric.