Frequent question: Can you tell me which part of the sewing machine do we put the spool of thread into?

The spool thread comes from the top of the machine and goes through the upper thread guide, while the bobbin thread is under the needle and goes through the bobbin thread guide.

Where the spool of thread is placed?

Generally speaking stacked thread should be placed on a vertical spool pin on the sewing machine. The thread should leave the spool at a RIGHT angle, in line with the direction of the wound thread. This will stop the thread catching on the grooves at the end of the spool.

Do you thread the bottom thread on a sewing machine?

Sewing machines need an upper and a lower thread to form the stitches. The lower thread is kept in a small bobbin stored underneath the presser foot. The mechanism for winding the bobbin may vary based on the model of your sewing machine. I will show you one way, which is actually very common.

Do you thread a sewing machine needle front to back?

What direction do you thread a sewing machine needle? The thread will always go from the front of the needle to the back. Avoid turning or twisting the thread as you pass it through the eye of the needle. For beginners, the eye of the needle is the small hole near the point of the needle.

IT IS INTERESTING:  You asked: Can you use tile adhesive for Mosaic?

What are sold in balls or spools 50/70 and 100 yards?

Threads is sold in balls or spools carrying 50, 70 and 100 yards.

What kind of machine that makes you an easier and faster?

In addition to sewing faster, the serger makes a stronger seam than conventional sewing machines. Its system of needles and loopers forms a network of interlocking stitches that extend over the edge of the seam, which is why the serger is sometimes called an overlock machine.

Are all Singer Bobbins the same?

Bobbin Tips & Hints



Use only bobbins that are the same class/style as those that come with your machine – don’t substitute! SINGER® branded bobbins are recommended for best results. … The thread that is wound too loosely can cause machine jamming. The thread that is wound too tightly can distort or break the bobbin.

Why are there two spool pins on a sewing machine?

This arrangement allows the spool of thread to stay out of the machine’s sewing mechanisms and permits easy access for the machine user. If a machine has more than one spool pin, the machine can most likely utilize more than one needle simultaneously.

Why does my thread bunch up underneath?

Your Thread Tension Is Too Tight



Sewing machine manufacturers suggest that you don’t mess with your bobbin thread tension too much, but you should adjust your upper thread tension if you keep getting bunched up thread underneath your fabric. If your tension is too tight, it can pull your thread and break it.

IT IS INTERESTING:  Can I put antibiotic ointment on my stitches?

Do I have to use bobbin thread?

Can you use a sewing machine without a bobbin? You can’t sew without a bobbin, as the machine requires two spools in order to operate properly. Therefore, you will need to add the bobbin thread in addition to your needle thread.

What is the most suitable fabric for beginners?

Ideal Fabrics for Beginner Sewists

  • Cotton Voile. With a crisp and smooth hand, this is a beginner’s dream. …
  • Cotton Shirting. Shirting is crisp with a bit of texture that creates a little friction, making it easier to handle. …
  • Chambray. …
  • Linen. …
  • Ponte.
My handmade joys