Why is my embroidery machine Birdnesting?

The main source of birdnesting or looping is improperly inserted or threaded bobbin or running the embroidery machine with no bobbin. … A tight bobbin tension, together with highly loose needle thread tension, can cause birdnesting.

What causes nesting in embroidery?

Bird nests occur when thread bunches up underneath the needle plate, causing broken threads, skipped stitches, and uneven tension. This is typically caused by the tension balance being out of whack or the top thread is not threaded correctly.

Why is my top thread bunching underneath?

Your Thread Tension Is Too Tight



Make sure that you are using the same weight thread in both your bobbin and upper thread. If you don’t, your tension can be uneven and cause you to get bunched-up thread under your fabric. … If your tension is too tight, it can pull your thread and break it.

How do I stop my threads from nesting?

How To Avoid Thread Nests While Sewing

  1. Rethread. Remove the thread spool and bobbin; rethread your sewing machine with the presser foot up. …
  2. Replace Needle. A damaged or dull needle may be the problem. …
  3. Testing 1, 2, 3. Use threads of different colors in the needle and bobbin to stitch a test seam.
IT IS INTERESTING:  Best answer: Who improved the sewing machine?

What should the tension be on an embroidery machine?

When doing machine embroidery, the tension dial should be set somewhere between 2 to 6. If the stitches appear loose, turn the tension up one notch and embroider again.

Why is my embroidery not lining up?

Your designs may not line up because of improper hooping, if you’ve hooped the fabric too loosely or too tightly.

Why does my thread keep jamming?

The tension could be too tight or too loose. Set the tension to the basic thread tension setting or adjust the tension manually. The combination of the needle size, thread size and fabric is incorrect. Be sure to use the correct size needle and thread for the type of fabric that you are sewing.

How do I know if my bobbin tension is correct?

The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.

What causes bobbin thread to ball up?

Dull Needle



The sharp point of the needle catches the bobbin thread, which makes a loop. This interaction creates knots, which are the building blocks of sewing machine stitches. If the needle is dull, this process may not work properly, causing a knot to get caught in the bobbin thread area instead of in the fabric.

My handmade joys