– Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. … – Make sure that the upper thread is threaded properly. – Re-thread your machine, if necessary.
Why is my bobbin winder not working?
The two most common problems are that you either need a new bobbin tire, or just need to adjust the position of the winder a little closer to the hand wheel. Remove the top cover and you will see the winder assembly. Loosen the two screws that hold the assembly nudge it closer to the hand wheel side.
How does bobbin thread get picked up?
With your right hand, turn the balance wheel toward you (counterclockwise) until the needle moves down and back up again to its highest position. The upper thread should have caught the lower thread in a loop. Pull the upper thread toward you and the lower thread will come up from the bobbin in a large loop.
Why won’t my sewing machine catch the bobbin thread?
Why won’t my machine pick up the bobbin thread? … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension. Now, it’s time to draw up your bobbin thread.
Why won’t the needle on my sewing machine move?
A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. Engage the hand wheel clutch if you have it disengaged for bobbin winding. If the needle won’t move with the clutch engaged, unplug the sewing machine and check the drive belt.
How do you fix common sewing machine problems?
HERE are 10 most common trouble areas of a sewing machine:
- Change the Needle. …
- Clean the Machine. …
- Check the Top Threading. …
- Quality Thread. …
- Bobbin thread not in the bobbin tension. …
- Not having your machine cleaned annually. …
- Wrong bobbin. …
- Needle not high enough.
What should my tension be on my sewing machine?
What is Perfect Sewing Machine Tension? Perfect sewing machine tension occurs when the top and bottom threads are perfectly balanced. That means you shouldn’t see any little loops on either the top or bottom of your fabric and the stitching should look even on both sides.
Why is my sewing machine Birdnesting?
The main source of birdnesting or looping is improperly inserted or threaded bobbin or running the embroidery machine with no bobbin. … A tight bobbin tension, together with highly loose needle thread tension, can cause birdnesting. Flagging occurs when the hoop bounces up and down during sewing.
What am I doing wrong with my bobbin?
My Bobbin Moves Slowly Or Gets Stuck
It’s very common to have problems sewing caused by the bobbin case not moving freely or getting stuck, causing jamming or skipped stitches. … It can also occur if the bobbin thread is not attached correctly, the thread has formed a knot or a problem with the bobbin case.
Do you need to thread the bobbin?
The thread in a bobbin is only one of two thread sources needed when using a sewing machine. Together, the two threads create the stitching. Although you can learn how to wind a bobbin by hand, many sewing machines also have a bobbin winder mechanism.
Where does the bottom bobbin thread go?
Once you have a wound bobbin, it goes in the machine’s bobbin case to supply the lower thread as your machine sews. To load your bobbin, lift your needle and presser foot to the highest position (your machine will either use a hand wheel or a button for this) and remove the bobbin cover.
What does the bobbin thread do?
When sewing with a machine, the thread wound around the bobbin links with the upper needle thread to form the bottom part of a stitch. Typically used in machine embroidery, quilting, and sewing fine fabrics, bobbin thread is lightweight and strong, adding little bulk while still securing stitches.