Adjust the bobbin tension as well to fine-tune your stitches. Many times thread breaks simply because the tension settings are too tight for the thread. Starting from the “loose side of things” and tightening the tension produces better results than to try and work backwards from a “too tight” setting.
Why does my top thread keep breaking while free motion quilting?
The most common reason why thread shreds, frays, or breaks at the needle is because the eye is too small to accommodate the thread, causing stress and friction, which results in shredding or breaking the top thread.
What is the best thread for free motion quilting?
The best threads for free-motion quilting are 100% cotton, nylon or polyester in weights between 40 to 60, with 50 weight being the most popular. The thread you choose can be used in both the bobbin and the needle.
How do you keep stitches even when free motion quilting?
If your quilting machine has a speed control, use mid-speed if your stitches aren’t coming out even. If you have no speed control, put a book (not a quilting one!) under the pedal to stop it at the fastest speed you are comfortable with. The faster the speed, the smoother and easier it is to stitch.
Is free motion quilting hard?
Free motion quilting can be a challenging technique to master on your home sewing machine. If you’re used to quilt piecing or garment sewing, you’re used to the machine feeding the fabric forward and producing beautiful, evenly spaced stitches.
What is the best stitch length for machine quilting?
The recommended stitch length for machine quilting is 2.5 to 3.0 which is basically 8 – 12 stitches per inch. If you’re new to quilting, it’s best you always use the recommended stitch length.
How do I choose a quilting thread?
When it comes to shopping for thread, your best bet is to choose one made of long staple cotton which refers to the variety used to make the thread. The longer fibers, or staples, are ideal for quilting because the way the thread is spun decreases fuzz, corresponding to a decrease of lint while sewing.
Can you use all purpose thread for machine quilting?
As mentioned previously, both all-purpose and quilting thread are both safe choices when looking at thread for hand quilting. Choosing the best hand quilting thread is highly dependent on what you are sewing. If it’s an applique part of the quilt, then stick to thin threads, particularly those labeled for applique.
Is cotton or polyester thread better for quilting?
Cotton threads generally have a matte finish while polyester threads will have a bit of shine. Cotton threads will produce some lint while sewing, while polyester threads don’t produce lint. Cotton is great for piecing, while polyester is better used for quilting. Cotton will shrink, while polyester will not.
Can you free motion quilt with the feed dogs up?
The combination of setting the stitch length to the lowest setting and covering the feed dogs with the supreme slider has been the ultimate trick to free motion quilting beautifully with the feed dogs up.
Where do you start free motion quilting on a quilt?
Start quilting by pulling the bobbin thread up to the top of the quilt. Using the handwheel on the right of your machine, rotate towards yourself to drop the needle down, then keep rotating until it comes ALL the way up and is even starting to dip back down again.
Why does my thread keep bunching up underneath?
Your Thread Tension Is Too Tight
Sewing machine manufacturers suggest that you don’t mess with your bobbin thread tension too much, but you should adjust your upper thread tension if you keep getting bunched up thread underneath your fabric. If your tension is too tight, it can pull your thread and break it.
What should my sewing machine tension be set at?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
Why does my thread break when I Backstitch?
The upper thread tension could be set too tight. Set the tension to the best thread tension setting or less. Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool. … Check that the bobbin is wound so that it about 80% full and that the thread is evenly wound.