How do you take the cover off a Kenmore sewing machine?
On the side of the faceplate cover there’s a circle… pop open that circle. cover to reveal a tightened screw…. unscrew it and voila!
What number should the tension be on a sewing machine?
As the bobbin thread tension is factory-set and wouldn’t usually be adjusted for normal sewing. So we’ll be talking only about the top thread tension since that’s where you’d usually make the adjustments. The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing.
Why is my sewing machine making uneven stitches?
The most common reason for uneven stitches is old or inferior thread. Another cause for uneven stitches is the fabric is being pulled while sewing. … It is also crucial to check that the bobbin is correctly threaded in the bobbin case, to prevent uneven stitches.
Do you have to Backstitch a zigzag stitch?
Do you have to backstitch a zigzag stitch? You should backstitch zigzag stitches to prevent the stitches from unravelling. To do this, simply use the reverse function on your sewing machine to stitch a few stitches backwards, then continue sewing forwards again.
How do you take apart a Kenmore sewing machine?
Turn the clutch knob toward you, or counter-clockwise, to release it. The clutch knob should be located on the right side of your machine. For most models, you will need to hold the outside of the knob still with one hand while turning the inner portion of the knob toward you with the other hand.
When was the Kenmore 385 sewing machine made?
If it says 117.123 then it was made in 1939. Here is a link that covers the early years of the Kenmore sewing machine from 1934 to 1965. If your sewing machine has a 385 model number, chances are it was made by Janome and after 1965.
What does the stitch count on a sewing machine mean?
Actually, there are two separate stitch counts on a sewing machine — similar to a car. One is the lifetime stitch count, and the other is the maintenance count. When you sew so many stitches, the oil light comes on, or the “time for maintenance” light.
What is the strongest stitch pattern?
Backstitch is the strongest stitch that you can sew by hand. It is also thankfully one of the easier stitches to learn too which makes it an ideal beginner sewing stitch.
What is the best stitch for hemming?
Twin needle hems are especially effective on knit fabrics as it will flex with the fabric. 1. Use a serger or an overcast stitch to sew a finished edge on the raw edge to be hemmed.