How do you wind a bobbin without a hole?

Just wind a few turns of thread around the center post of the bobbin, leaving a short tail, then use the powered bobbin winder to fill it. Or you can make a slip knot in the end of the thread, slip it around the bobbin center post, and then wind on the bobbin winder.

Can I wind a sewing machine bobbin by hand?

With bobbins comes the need to wind them. … Now, if you are using a thick yarn or thread, this is no big deal to do by hand. However, if you are using a fine yarn or thread, this can be a laborious process by hand.

What are the holes in bobbins for?

Then take a look at your bobbin. There should be a tiny little hole on the side for you to put your thread through. Thread from the inside of the bobbin, out, so your thread sticks out the side an inch or two.

What can I use instead of a bobbin?

There are machines that sew without a bobbin – they are called sergers, overlockers, chain stitch machines, and the thread for the underside of the fabric feeds off of a moving “looper” (a hinged hook with guides for the thread).

IT IS INTERESTING:  What is the best software for digital scrapbooking?

Why won’t my sewing machine wind a bobbin?

If your bobbin does not wind quickly and smoothly when you press on your foot pedal, your bobbin winder might not be fully engaged. This can cause uneven winding. Make sure you push your bobbin pin all the way over or loosen your bobbin wheel completely to engage your bobbin winding mechanism.

Can a bobbin be too full?

The short answer is YES! Filling a sewing machine bobbin too tightly can make a plastic bobbin bulge or stretch the thread if you are using a metal bobbin. This may be hard to see but can cause all kinds of problems. Plastic bobbins can become compressed in the center causing the bobbin to distort.

Can you sew without a bobbin?

You can’t sew without a bobbin, as the machine requires two spools in order to operate properly. Therefore, you will need to add the bobbin thread in addition to your needle thread.

Do all Singer sewing machines use the same bobbins?

Bobbin Tips & Hints



Use only bobbins that are the same class/style as those that come with your machine – don’t substitute! SINGER® branded bobbins are recommended for best results. … The thread that is wound too loosely can cause machine jamming. The thread that is wound too tightly can distort or break the bobbin.

Are bobbins universal?

There is no such thing as a universal bobbin, meaning no single bobbin will fit every sewing machine. Some sewing machines tolerate a slightly different bobbin better than others, but using the incorrect bobbin will most likely affect the stitch quality of your project, and could result in damage to your machine.

IT IS INTERESTING:  Are knitting gloves difficult?

How do you start a bobbin?

Place the bobbin, with the holes on the top, on the bobbin winder. Put your selected thread onto the spool pin. Loop the thread around the thread guide, then pull the thread from the inside into the small hole in the top of the bobbin. Wind a bit of thread around the bobbin manually.

What should you do if the take up lever is not visible?

How to thread the take up lever when it does not come out of the…

  1. Raise the needle to its highest position by turning the hand wheel toward you.
  2. Make sure the mark on the hand wheel points up, or just press the needle position button twice to raise the needle.
My handmade joys