How do you take apart a Janome Sewing Machine?

How do you disassemble a sewing machine?

Your left index finger goes to the notch at the back of the cover and the left-hand thumb goes to the front. Now slide the cover towards you. On another machine, to remove the cover you need to remove the needle, thread, bobbin, and bobbin case first. Then you remove the shuttle hook and the needle plate.

How do you take apart a Pfaff sewing machine?

How to Take Apart a Pfaff Sewing Machine

  1. Step 1: Remove the top cover. …
  2. Step 2: Remove the set screws for the front cover. …
  3. ​Step 3: remove the screw located at the bottom center. …
  4. ​Step 4: Removing the bottom cover means you have to take the top and back cover off first.

How often should I service my Janome sewing machine?

We’d recommend a thorough clean every time you change your needle, or approximately every 8 hours of use. If you haven’t done that for a while, you’ll be amazed at the accumulation of dust, thread and lint.

Should a Janome sewing machine be oiled?

There is no such thing as oiling a machine too much. As long as you only use sewing machine oil, this will never hurt your machine. In short – err on the side of keeping your machine MORE clean and MORE oiled. When I took off the needle plate on my Janome 1600 in the video above, the bobbin area didn’t look that dirty.

IT IS INTERESTING:  Your question: How do you bind a quilt with square corners?

How often should I oil my Janome sewing machine?

This oiling and house keeping is IN ADDITION to servicing your machine(s) at least once every 18 months – 2 years.

How do you fix a sewing machine problem?

HERE are 10 most common trouble areas of a sewing machine:

  1. Change the Needle. …
  2. Clean the Machine. …
  3. Check the Top Threading. …
  4. Quality Thread. …
  5. Bobbin thread not in the bobbin tension. …
  6. Not having your machine cleaned annually. …
  7. Wrong bobbin. …
  8. Needle not high enough.
My handmade joys