How deep should rod pockets be?
For example, a standard curtain rod will measure 2 inches around so your rod pocket opening will need to be 2 1/2 inches; add this to the length of your curtains. Continental curtain rods may measure up to ten inches around, so be sure you measure.
How do you measure fabric for rod pocket curtains?
How to Measure: Rod Pocket Curtains
- Measure Length. Measure from the top of the curtain rod down to where you want the curtain to fall. …
- Measure Width. The curtain should measure double the width of the window for fullness.
- Styling Tip. The length of your curtain is a matter of personal preference.
How wide should rod pocket curtains be?
Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How do you make rod pocket curtains without sewing?
Rings with clips are an amazingly chic and ultra-easy way to hang curtains, draperies, and valances without all the fuss of sewing. They slip right over a rod and slide back and forth easily, attaching to your fabric with small clips that hang off the rings.
What does Rod Pocket mean?
Rod pocket means that the rod will go through the pocket on the back of the curtain and back tab means that there are also tabs in the back of the curtain if you wish to hang it like that. … If you hang through the rod pocket, it may not be as easy to move the curtain as it would be if you hung through the back tabs.
What does 3 inch rod pocket mean?
Curtain Rod Pockets
Our Lace Window Treatments and Window Tiers usually have this size pocket. A 3 inch pocket will accept a 2 1/2 inch continental curtain rod or a 1 1/2 inch diameter round decorative rod. Most of our Curtains and Drapes have this size pocket. … Tabs and grommets do not hide the curtain rod.
What diameter should my curtain rod be?
Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.
How do you measure a rod pocket valance?
To make a plain valance, first measure the width of your window. Multiply this width by 1-1/2. The length of the valance should be 1/4 the window height plus one inch. Using these measurements, cut a rectangle from your fabric and lining.
How do you line a rod pocket curtain?
Lay the curtain fabric and lining together, right sides together. Line up the top edge and one side edge. Sew the side edges together using a 1/2″ seam allowance. Keep the top edges lined up, and move the lining fabric over so that the other side edges line up.
Do curtains come with rods?
Curtains do not typically come with curtain rods. You’ll need to pick out your curtains, and then find the rod that works for your budget, style, and type of curtain.
Do curtains have to touch the floor?
So should curtains touch the floor? The short answer is yes… usually. But when making any decision about your window treatments, whether they’re drapes, blinds, or shades, it’s important to consider every aspect of style and function so you can choose the best option for your windows and your home.
What is the rule of thumb for hanging curtains?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.