How do I troubleshoot my Brother sewing machine?

How do I fix my Brother sewing machine that won’t sew?

Machine not sewing



Some common quick fixes: Check that the bobbin winder shaft is not pushed to the right; if it is, then push it to the left. Check the machine is threaded correctly ensuring the threading line on the hand wheel is at the top position (this puts the needle into the correct position for threading).

How do I reset my Brother sewing machine?

Reset Your Brother Machine

  1. Press [Settings]>[All Settings]>[Initial Setup]>[Reset]. …
  2. Swipe up or down or press or to display the type of reset functions, and then press the reset function you want to use. …
  3. [Machine will reboot after resetting. …
  4. Press .

Why is my thread looping underneath?

Looped stitches are usually caused by improper tension. … Looping of stitches is sometimes caused by placing the bobbin in the bobbin case the wrong way. Check your machine’s manual for directions on inserting the bobbin. There may be lint, dirt, or thread between tension discs.

IT IS INTERESTING:  Can I give my dog stitches?

Why is My Brother sewing machine not picking up bobbin thread?

There could be several things that could cause the machine not to pick up the bobbin thread. The upper thread could be tangled. Remove the thread completely from the machine. The correct size spool cap should be used for the size of the thread spool.

What should the tension be on a Brother sewing machine?

The tension dial should be set between 2 to 6. b. When the upper thread is just visible on the back of the fabric, the thred tension is correct.

How do you unjam a Brother sewing machine?

How do I get my machine un jammed?

  1. Immediately stop the sewing machine.
  2. Turn off the sewing machine.
  3. Remove the needle from the machine. …
  4. Remove the presser foot and presser foot holder from the machine.
  5. Lift up the fabric and cut the threads below it. …
  6. Remove the needle plate cover.

How do I fix the error code E6 on my Brother sewing machine?

“E6” error message

  1. Check your upper thread and make sure it is threaded properly. – Make sure that the thread take-up lever is threaded.
  2. Remove the bobbin and bobbin case. – Clean any lint or loose threads. Image may differ, depending on the model. …
  3. The needle could be bent.

How do you fix bobbin tension?

To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.

IT IS INTERESTING:  Quick Answer: How do you knit an I Cord neckline?

Why isn’t my bobbin thread coming up?

– Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly. – Re-thread your machine, if necessary.

Why does my sewing machine keep jamming?

1 5 Reasons Why Your Sewing Machine Keeps Jamming: 1.1 Lack of tension on the upper thread. 1.2 Your machine is clogged at some point or place. 1.3 The needle is deformed or broken.

My handmade joys