How do I fix my sewing machine not working?

Why is sewing machine not sewing?

First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.

What do you do when your sewing machine won’t sew?

Machine is not sewing any stitches while trying to sew

  1. The machines top thread may not be threaded correctly. …
  2. Make sure the needle thread is behind the needle bar thread guide on the needle bar.
  3. The thread may be knotted or tangled. …
  4. The thread may be too thick for the needle.

What’s wrong with my sewing machine tension?

When sewing fabrics together problems can occur when the thread tension is not correct, the needle or bobbin is not inserted properly, or the machine is not threaded correctly. … Always place two layers of fabric together when producing a sewing sample to check thread tension, needle type and stitch length.

IT IS INTERESTING:  On what kind of embroidery Do we used to transfer design using the pricking method?

Why won’t my sewing machine needle go up and down?

A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. Engage the hand wheel clutch if you have it disengaged for bobbin winding. If the needle won’t move with the clutch engaged, unplug the sewing machine and check the drive belt.

Why is my bobbin not working?

Whenever the bobbin thread keeps looping on the back of the fabric you might have a problem with the tension of the needle thread. If the tension of the upper thread is too low it might not be able to pull the bobbin thread properly to form a perfect stitch.

What tension should my sewing machine be on?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

How do you fix bobbin tension?

To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.

Is my sewing machine broken?

17 Common Sewing Machine Problems and How To Solve Them

  • Thread bunching up under your fabric when sewing. …
  • Bent or broken needles. …
  • Fabric not feeding. …
  • Thread keeps breaking. …
  • Machine is skipping stitches. …
  • Bobbin tension not consistent. …
  • Seams in stretch fabrics coming out wavy. …
  • Sewing machine seizes up or won’t sew.
IT IS INTERESTING:  Your question: Can I make curtains out of burlap?

How do you diagnose a sewing machine problem?

HERE are 10 most common trouble areas of a sewing machine:

  1. Change the Needle. …
  2. Clean the Machine. …
  3. Check the Top Threading. …
  4. Quality Thread. …
  5. Bobbin thread not in the bobbin tension. …
  6. Not having your machine cleaned annually. …
  7. Wrong bobbin. …
  8. Needle not high enough.

Why is my thread bunching underneath?

Your Thread Tension Is Too Tight



Make sure that you are using the same weight thread in both your bobbin and upper thread. If you don’t, your tension can be uneven and cause you to get bunched-up thread under your fabric. … If your tension is too tight, it can pull your thread and break it.

My handmade joys