Best answer: Why is my bobbin thread messy?

There are several culprits for this ranging from a dull needle, improper threading or tension. The tension in both your upper and bobbin threads need to be even. The bobbin could also be placed incorrectly. More than likely, you forgot to put the bobbin back correctly while cleaning your machine.

Why is my thread bunching underneath?

Your Thread Tension Is Too Tight



Make sure that you are using the same weight thread in both your bobbin and upper thread. If you don’t, your tension can be uneven and cause you to get bunched-up thread under your fabric. … If your tension is too tight, it can pull your thread and break it.

How do I fix bobbin thread bunching up?

How to Fix Bobbin Thread Bunching and Other Threading Problems

  1. Thread the Machine Properly. Re-thread the upper part of the sewing machine making sure the thread is passing through every single thread guide on its way to the needle. …
  2. Change the Needle. …
  3. Inspect the Bobbin. …
  4. Clean the Machine.

Why is my bottom stitch loose?

Loose seam This indicates that the tension is too loose on both the bobbin and needle thread, the machine has not been threaded correctly, or the thread has not been placed properly between the tension mechanism. The easiest way to spot unbalanced tension is to look for visible knots or loops at the end of each stitch.

IT IS INTERESTING:  Frequent question: How many yards of yarn do I need for a 50x60 blanket?

Why does bobbin thread knots up?

Dull Needle



The sharp point of the needle catches the bobbin thread, which makes a loop. This interaction creates knots, which are the building blocks of sewing machine stitches. If the needle is dull, this process may not work properly, causing a knot to get caught in the bobbin thread area instead of in the fabric.

What tension should my sewing machine be on?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

Why does my thread keep jamming?

The tension could be too tight or too loose. Set the tension to the basic thread tension setting or adjust the tension manually. The combination of the needle size, thread size and fabric is incorrect. Be sure to use the correct size needle and thread for the type of fabric that you are sewing.

My handmade joys