A longer stitch length is typically used for basting (temporary stitches), sewing with heavyweight fabric, or for defining a topstitch. … The stitch width determines how far the stitch will go from side to side. Below are stitch width comparisons for zigzag stitches (the stitch length was set at 2.5mm).
What stitch width should I use?
What stitch length should I use?
|What is the best stitch for:||Suggested Stitch Length (mm)||Stitches Per Inch|
|Standard Stitch Length||2.5 – 3.0||8 – 10|
|Basting stitch||5.0 – 7.0||4 – 5|
|Stay-stitching||1.5 – 2.0||12 – 8|
|Top-stitching – light/medium weight||3.0 – 3.5||7 – 8|
What is stitch width on a sewing machine?
Stitch width is a key factor with zigzag and decorative stitches. It is simply the horizontal space (left to right) that a stitch takes up between needle entries in your fabric. When you sew zigzag or decorative stitches, your machine uses both stitch length and stitch width to make magic!
What is the stitch width?
The stitch width is how wide each stitch can be made, from a narrow stitch to a wide stitch. The stitch width adjustment gives the machine the ability to go from a straight line stitch to a zigzag stitch. Stitch Width. The stitch length determines how much fabric is fed under the presser foot.
What is stitch control?
A stitch regulator is a tiny computer attached to a sewing machine that constantly adjusts the machine’s stitch speed to accommodate the speed of the fabric during free-motion stitching. This ensures balanced, equal-length stitches.
What should the tension be for a straight stitch?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
What does a stitch width dial do?
Setting the stitch width
The stitch–width control sets the distance the needle moves from side to side while creating a stitch. You don’t need to worry about the stitch width when sewing straight stitches — just set it to 0 (zero). All machines measure the stitch width in millimeters (mm).
What settings should my sewing machine be on?
Most sewing is done in the 2.0 to 2.5 range. If you are foundation paper piecing, you may want to decrease your stitch length so that the paper tears away easier. Top stitching and quilting are usually done in the 3.0 to 3.5 range. Basting and gathering stitches are the longest, from 4.0 – 5.0.
Why is my zigzag stitch sewing straight?
If the upper thread appears as a single line, the lower thread is incorrectly threaded. Instead of the appropriate tension being applied to the lower thread, it is pulled through the fabric when the upper thread is pulled up.
How do you change the width of a stitch?
Adjusting the stitch width (For models equipped with the stitch width dial)
- Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.
- Turn the stitch width dial to adjust the stitch width that you want to sew.
What sets the width of the zigzag stitch?
When using the zigzag stitch, the width sets the swing of the needle, not the needle position as it does with the straight stitch. Adjusting the width of the zigzag stitch will affect how wide the stitch is. For a seam finish, the width of the zigzag stitch will affect how the fabric lays.
What is the difference between stitch length and stitch width?
The average stitch length is 2.5mm. … The stitch width determines how far the stitch will go from side to side. Below are stitch width comparisons for zigzag stitches (the stitch length was set at 2.5mm). Notice that when set to 0mm the stitch is straight.
What is stitch per inch?
A sewing machine sewing at 5,000 SPM at 14 SPI will sew 9.9 yards of seam per minute. More stitches per inch will also consume for thread per inch of seam. This will contribute to higher seam strength and more elastic seams, but will also increase the consumption of thread required to sew the garment.
What is the function of stitch width regulator?
Stitch Width Regulator/Selector – The mechanism that allows you to adjust the width of a wide stitch, such as a zigzag stitch. Take-up Lever – Part of the upper threading sequence, it helps control the flow of thread. It’s the part that goes “up and down” as you sew.