Why isn’t my sewing machine catching the bobbin thread?

Why won’t my machine pick up the bobbin thread? … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension. Now, it’s time to draw up your bobbin thread.

Why is my bobbin winder not working?

The two most common problems are that you either need a new bobbin tire, or just need to adjust the position of the winder a little closer to the hand wheel. Remove the top cover and you will see the winder assembly. Loosen the two screws that hold the assembly nudge it closer to the hand wheel side.

How do you get the bobbin thread to catch a singer?

Hold the needle thread. Turn the hand wheel slowly towards you to lower and raise the needle. Gently pull the needle thread to pull up the bobbin thread. Pull both threads towards the back of the machine.

Why does my thread bunch up underneath?

Your Thread Tension Is Too Tight



Make sure that you are using the same weight thread in both your bobbin and upper thread. If you don’t, your tension can be uneven and cause you to get bunched-up thread under your fabric. … If your tension is too tight, it can pull your thread and break it.

IT IS INTERESTING:  What is the size of yarn called?

Why won’t the needle on my sewing machine move?

A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. Engage the hand wheel clutch if you have it disengaged for bobbin winding. If the needle won’t move with the clutch engaged, unplug the sewing machine and check the drive belt.

How do you fix common sewing machine problems?

HERE are 10 most common trouble areas of a sewing machine:

  1. Change the Needle. …
  2. Clean the Machine. …
  3. Check the Top Threading. …
  4. Quality Thread. …
  5. Bobbin thread not in the bobbin tension. …
  6. Not having your machine cleaned annually. …
  7. Wrong bobbin. …
  8. Needle not high enough.

How do you fix bobbin tension?

To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.

What is the bobbin thread for?

The purpose of a bobbin is to hold thread for a sewing machine. The bobbin feeds the thread through the machine to help secure a stitch.

What is bobbin fill thread?

Quite simply, it’s a lightweight thread that you wind on to your bobbin. … You use this thread when using an embroidery thread for embroidery or decorative stitches.

My handmade joys