How do you make a flat felled seam?

The Yoruba beaded crown is the most important symbol of Yoruba kingship. The crown is a carefully constructed cone of beads with a fringe that covers the wearer’s face. The purpose of the crown is to eliminate the individuals’ personality and to supplant it with the divine power of the dynasty.

How do you do a flat felled seam?

Flat Felled Seams

  1. Sew fabric with wrong sides together using a 5/8” seam allowance.
  2. Press open seam.
  3. Trim one side of the seam allowance to 1/4”.
  4. Fold the seam allowance of the longer side in so the two raw edges meet in the middle (or fold the long side over the short side and overlap the raw edges). Press.

What is the difference between a French seam and a flat felled seam?

A flat felled seam shows stitching on the right side (think of the seams on the side of a pair of jeans), while a french seam does not (it is found in many high end sheer garments). … Sew the two pieces of fabric, right sides together, with a 5/8″ seam.

IT IS INTERESTING:  Question: How do you make a wool blanket soft again?

What does a flat felled seam look like?

A flat felled seam has no visible seam allowance inside or out. Instead, the seam allowance is enclosed within the seam. Flat felled seams are very strong and durable, which is why they’re often used on sturdy fabric, such as denim. Commercial sewing machines typically have a system that does this seam in one step.

Where are flat felled seams used?

It is useful for keeping seam allowances flat and covering raw edges. The flatfelled seam is the type of seam used in making denim jeans, although it appears inside-out to reduce stitching. It is also used in traditional tipi construction. There are flatfelled seams and lap-felled seams.

What is a flat fell seam?

: a strong seam with two lines of stitching showing on the right side that is produced by folding one raw edge under the other and stitching it flat or slip-stitching it on the wrong side.

How do you hand finish seams?

This method of finishing a seam allowance by hand will prevent them from fraying, and lightly reinforce the seam. Cut down the seam allowance to 1/8″. With each stitch, you will catch 1 thread from the body of the fabric 1/8″ from the seam, then pass the needle through the seam allowance just above the seam.

What are the types of seams?

In clothing construction, seams are classified by their type (plain, lapped, bound, flat) and position in the finished garment (centre back seam, inseam, side seam). Seams are finished with a variety of techniques to prevent ravelling of raw fabric edges and to neaten the inside of garments.

IT IS INTERESTING:  Frequent question: How do you design clothes for crochet?

What is the strongest seam?

Flat felled seams are the strongest seams and won’t fray as raw edges are hidden. Although often sewn on thick fabrics, they can be sewn on thinner fabrics as they produce a very neat finish. … With right sides of fabric facing, sew a line of stitching 5/8″ from the edge of the fabric.

When would you use a flat felled seam?

Flat felled seams are used whenever a clothing item is going to see a lot of wear. They provide a very strong seam, and leave the inside of the garment nice and tidy.

How much seam allowance do you need for a French seam?

To make a proper french seam, you’ll want to be using a seam allowance of at least 5/8” or 1.6 cm, which is a standard seam allowance on many paper patterns for woven. If your pattern doesn’t have that much seam allowance, simply re-trace your pattern piece and add a little more before cutting out the fabric.

Can you use a flat felled seam on a curve?

Flat Felled Seam around a Curve



If you are using the flat felled seam around a curved edge, then clip the trimmed edge of the seam before encasing the seam as this will give more elasticity to the seam and allow you to turn a corner.

What is a top stitched seam?

Topstitch (sometimes written as two words – top stitch) is simply decorative stitching on the outside of a garment or sewn item. Look at any pair of jeans in your wardrobe and you will see large amounts of topstitch.

IT IS INTERESTING:  How do tailors shorten shirt sleeves?

What is a flat lock stitch?

A flatlock is sewn leaving loose the needle’s thread tension (around zero) because you need to pull the fabric to open the seam after you’ve sewn it. This way it will lay flat and the needle’s thread won’t pull the fabric. … Press flat, then trim seam allowances close to the flatlock stitching.

My handmade joys