How do I fix the handwheel on my sewing machine?

The bobbin case inside your sewing machine can accumulate a lot of lint over time. When this lint builds up, it causes the handwheel to feel jammed. So, a simple fix for relieving tension in your handwheel is to remove the bobbin case, grab a small brush, and clean out the lint.

Why is my handwheel not working?

Remove the bobbin case and clean any lint or thread that may be stuck or have built up in the machine using either a small brush or vacuum. … If the handwheel moves freely with the bobbin case removed please re-insert the bobbin case and try using the machine again.

How do you remove a handwheel from a sewing machine?

Loosen The Inner Knob To Free The Handwheel



When you wind the bobbin and have to turn the handwheel you will unlock the inner knob. In the same way, you must unlock it to free the handwheel. If you are using an older model of sewing machine this is the first thing that you must do get the handwheel to turn.

IT IS INTERESTING:  Can I knit with thread?

What causes a sewing machine to lock up?

Sewing Machine: Machine locks up. Thread bunched up in the shuttle race often causes the sewing machine to lock up. … Clean lint and debris out of the shuttle race; they can prevent the needle from hooking the thread, resulting in thread bunching up in the shuttle race and jamming the needle.

What is the hand wheel on a sewing machine?

The balance wheel, or hand wheel, is the round wheel located at the upper right of the sewing machine. The balance wheel manually advances the sewing machine. … The balance wheel is most often used to sink the needle before you start a seam, or to raise the needle once you have finished a seam.

Why won’t my sewing machine needle go up and down?

A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. Engage the hand wheel clutch if you have it disengaged for bobbin winding. If the needle won’t move with the clutch engaged, unplug the sewing machine and check the drive belt.

What holds the bobbin while it winds?

Bobbin spindle- holds the bobbin while it winds.

Why is my thread bunching underneath?

Your Thread Tension Is Too Tight



Make sure that you are using the same weight thread in both your bobbin and upper thread. If you don’t, your tension can be uneven and cause you to get bunched-up thread under your fabric. … If your tension is too tight, it can pull your thread and break it.

IT IS INTERESTING:  Question: How many types of stitches are there?

What tension should my sewing machine be on?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

What direction do you turn the hand wheel on a sewing machine?

On most modern electric sewing machines the hand wheel (that “bump” on the right side of your sewing machine) is turned toward you (counter-clockwise if you are looking at the machine from the right side of your machine) to take a manual stitch.

Why is my sewing machine hand wheel stiff?

When pieces of fabric fibers block the way in any part of the machine, the wheel may get jammed, disrupting the smooth functioning of the device. Dust pile-up: One of the common reasons for sewing machine handwheel hard to turn can be due to the piling up of dirt and dust in the mechanical parts.

My handmade joys